此页面由 AI 自动翻译。查看英文原版
最后更新

本页目录

  • 类
  • MixUp
Claude CodeCodexCursor
Luxonis 智能体工具包为你常用的编程智能体加载 Luxonis 上下文与技能,更快地基于 OAK 开发应用。
安装工具包
最后更新
Python API: luxonis_ml.data.augmentations.custom.mixup

类

MixUp

基于批次的增强,将两张图像混合在一起。混合是通过基于从指定分布中采样的混合系数 α 对两张图像进行凸组合来执行的。结果图像计算如下:
x̃ = α**xi + (1 − α)xj
如果图像大小不同,则第二张图像将调整大小以匹配第一张图像。

方法

init
Python
1def __init__(alpha: float | tuple[float, float] = 0.5, keep_aspect_ratio: bool = True, p: float = 0.5):
创建 MixUp 增强。参数
  • alpha (float | tuple[float, float]): 混合系数或要从中均匀采样的范围。必须保持在 [0, 1] 之间。
  • keep_aspect_ratio (bool): 调整大小时是否保留第二张图像的纵横比。
  • p (float): 应用变换的概率。
引发
  • ValueError: 如果 alpha 超出 [0, 1] 范围或 alpha 范围不是升序。
apply
Python
1def apply(image_batch: list[np.ndarray], image_shapes: list[tuple[int, int]], alpha: float, **_) -> np.ndarray:
将 MixUp 应用于一批图像。参数
  • image_batch (list[np.ndarray]): 要变换的图像。每张图像的形状应为 (H, W, C) 或 (H, W)。
  • image_shapes (list[tuple[int, int]]): 原始图像的形状。
  • alpha (float): 混合系数。
  • **_
返回
  • np.ndarray: 形状为 (Hout, Wout, C) 或 (Hout, Wout) 的单张图像,由输入图像混合而成。
apply_to_bboxes
Python
1def apply_to_bboxes(bboxes_batch: list[np.ndarray], image_shapes: list[tuple[int, int]], **_) -> np.ndarray:
将 MixUp 应用于一批边界框。参数
  • bboxes_batch (list[np.ndarray]): 要变换的边界框。
  • image_shapes (list[tuple[int, int]]): 原始图像形状。
  • **_
返回
  • np.ndarray: 变换后的边界框。
apply_to_instance_mask
Python
1def apply_to_instance_mask(masks_batch: list[np.ndarray], image_shapes: list[tuple[int, int]], **_) -> np.ndarray:
将 MixUp 应用于一批实例分割掩码。参数
  • masks_batch (list[np.ndarray]): 要变换的掩码。每个掩码的形状应为 (H, W, N),其中 N 是实例数。
  • image_shapes (list[tuple[int, int]]): 原始图像的形状。
  • **_
返回
  • np.ndarray: 形状为 (Hout, Wout, N) 的单个实例掩码。
apply_to_keypoints
Python
1def apply_to_keypoints(keypoints_batch: list[np.ndarray], image_shapes: list[tuple[int, int]], **_) -> np.ndarray:
将 MixUp 应用于一批关键点。参数
  • keypoints_batch (list[np.ndarray]): 要变换的关键点。
  • image_shapes (list[tuple[int, int]]): 原始图像形状。
  • **_
返回
  • np.ndarray: 变换后的关键点。
apply_to_mask
Python
1def apply_to_mask(masks_batch: list[np.ndarray], image_shapes: list[tuple[int, int]], alpha: float, **_) -> np.ndarray:
将 MixUp 应用于一批语义分割掩码。将掩码混合在一起。如果发生冲突,则选择与较高 α 关联的掩码中的类。参数
  • masks_batch (list[np.ndarray]): 要变换的掩码。每个掩码的形状应为 (H, W, C) 或 (H, W)。
  • image_shapes (list[tuple[int, int]]): 原始图像的形状。
  • alpha (float): 混合系数。
  • **_
返回
  • np.ndarray: 形状为 (Hout, Wout, C) 或 (Hout, Wout) 的单个分割掩码。
get_params
Python
1def get_params(self) -> dict[str, Any]:
从指定分布中采样混合系数。返回
  • dict[str, Any]: 包含带有采样混合系数的 "alpha" 键的字典。